5pt L & L; HNR/HANS 3" to 2" Shoulder; Pull-Down; Black
| Mfgr Part # | 717007RQP |
|---|---|
| Anchor Points | 5 |
| Buckle | Latch and Link |
| Should Belt Style | HNR/HANS |
| Shoulder Belt | 3" to 2" |
| Lap Belt | 3" |
| Sub Belt | 2" |
| Lap Adjusters | Pull-Down |
| Color | Black |
| Saftey Rating | SFI 16.1 |
| Notes | Black Hardware Forged Latch & Link Buckle Assembly with integral adjusters |
RaceQuip's Latch & Link 5-point HANS / HNR auto racing harness set has twin individual shoulder belts that are reduced to 2" above the adjusters to more easily accommodate a HANS or Head and Neck Restraint Device. These belts are manufactured using premium 3" polyester webbing and drop forged steel hardware to exceed the SFI 16.1 rating. Shoulders adjust from 20" to 62" and the lap belt adjusts from 20" to 60". All RaceQuip 717 series belts come as a "pull down lap" design, which means that the lap belts must be pulled down and away from the center latch & link buckle mechanism to tighten. All RaceQuip Latch & Link motorsports harness sets are distinguished by a pivoting hammer, called a "Duckbill" , which is located on the lap belt and locks all the belts into place by snapping down into a detent. Both shoulder belts and the sub-belt are hooked over the link; the link is inserted into the latch on the lap belt; the Duckbill is then brought down into and over the link, securely holding all the pieces in place. Since RaceQuip seat belt sets are "double adjustable" , lengths are simply adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place with the supplied ends.
SFI certified belts are tagged at the factory to expire in June or December two years after manufacture. This is a requirement of SFI Foundation, Inc. and Day Motor Sports has no control over this tag and cannot change the tag. SFI certified Driver Restraint Assemblies have a 2-year recertification period and must be sent back to the original manufacturer at the end of this time frame for inspection. Recertification is at the discretion of the manufacturer. Please check with the manufacturer if they recertify belts and what they charge, Day Motor Sports is not a manufacturer of Driver Restraint Assemblies (racing harness and belts).
© 2024 Day Motor Sports
All Rights Reserved
Website by GroupM7 Design™
6100 US Highway 69 N
Tyler, Texas 75706
M-Th: 8:30 am - 5:30 pm (CT)
Fri: 8:30 am - 3:00 pm (CT)
Sat-Sun: Closed
